--- Bob Dengler <[EMAIL PROTECTED]> wrote:
> But this begs another question: why does the RVS-8 > require such a high COS > voltage? I don't think I own a radio that supplies > that much voltage on > COS, nor have a ever used a controller that required > 8 volts of COS voltage. > > Bob NO6B > The RVS8 basically uses 12v logic to switch on input multiplexers. These are CMOS type parts that can run from less than 5v to 15 volts, they chose to use 12v rather than the more common 5v. For these inputs to work, they must see something higher than half the supply voltage. For a couple of bucks more they could have put in the level translation, but they chose not to. You can see a copy of the schematic at their website. Joe __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

