Bob,
The TKN6759A cable has identical seven-pin male plugs on both ends. It is used
in SpectraTAC satellite and remote receivers to connect the metering test jack
on a MICOR Sensitron receiver board to the backplane of the SpectraTAC unit, so
that the receiver functions can be monitored on the SpectraTAC meter module.
The seven-pin plugs have the same function as the MICOR station meter unit,
except that the SpectraTAC meter cable is plugged in on the back (component)
side of the receiver board.
73, Eric Lemmon WB6FLY
"[EMAIL PROTECTED]" wrote:
> Howdy
> Is this the small connectors or the large connectors for the micor chassis ?
> ......bob
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
