ok Brent if anyone needs uhf receivers i have some ,5 or 6 to spare ,,,,,,,,,
gervais,ve2ckn >From: "Brent" <[EMAIL PROTECTED]> >Reply-To: Repeater-Builder@yahoogroups.com >To: <Repeater-Builder@yahoogroups.com> >Subject: Re: [Repeater-Builder] Re: system board GE MASTR II >Date: Sat, 7 May 2005 21:15:04 -0500 > >It is a UHF >And Sorry Coy for the poor info and details ... I also have the molex >connectors and everything all wired and ready to go just missing a system >board. factory complete. all wires are intact just nothing to plug them >into. >----- Original Message ----- >From: "gervais fillion" <[EMAIL PROTECTED]> >To: <Repeater-Builder@yahoogroups.com> >Sent: Saturday, May 07, 2005 9:11 PM >Subject: RE: [Repeater-Builder] Re: system board GE MASTR II > > > > Brent > > your master 2 is Uhf or Vhf ? > > > > 73/s to all here at the group! > > > > gervais,ve2ckn > > > > >From: "Coy Hilton" <[EMAIL PROTECTED]> > > >Reply-To: Repeater-Builder@yahoogroups.com > > >To: Repeater-Builder@yahoogroups.com > > >Subject: [Repeater-Builder] Re: system board GE MASTR II > > >Date: Sun, 08 May 2005 02:05:42 -0000 > > > > > >Okay let me see if I have it. What you have is an exciter and a PA > > >(A transmitter only). A receiver from another base or mobile. No > > >system board. Okay, If you can't find a replacment receiver system > > >board, let me know, I'll help you with a work around. At least you > > >have the 10 V regulator in the shelf. > > > > > >What you will need are molex connectors and pins. They can be had > > >from Newark Electronics. I have bought the board mounted connectors > > >like the system baords have (you really won't need these) and the > > >regulator ones for connecting to the receiver boards there. > > >Good Luck > > >73 > > >AC0Y > > > > > >--- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]> wrote: > > > > well I have acquired another Ge Repeater with out the receiver, > > >and I have a > > > > receiver but the repeater I acquired no only was missing just the > > >receiver > > > > but the actual whole tray, the complete fold out osc, sq/audio > > >board and > > > > system board.. > > > > Oh no, no bad 10v reg card .. the control shelf is in tack and > > >great > > > > condition.. just need the system board that the receiver and the > > >rest of > > > > the cables connect to. > > > > thanks Coy > > > > ----- Original Message ----- > > > > From: "Coy Hilton" <[EMAIL PROTECTED]> > > > > To: <Repeater-Builder@yahoogroups.com> > > > > Sent: Saturday, May 07, 2005 8:15 PM > > > > Subject: [Repeater-Builder] Re: system board GE MASTR II > > > > > > > > > > > > > Are you building a radio or, do you have a bad 10 Volt regulator? > > > > > There are work arounds if you can't find one. > > > > > Good luck Bret > > > > > > > > > > --- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]> > > >wrote: > > > > > > Anybody know where I can locate a system board for a Ge Mastr > > >II > > > > > repeater > > > > > > I think the numbers are as follows 19D417205P1 Rev 3 > > > > > > > > > > > > > > > > > > Thanks > > > > > > Brent > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > > > > > > > > > > > > > > --- > > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > --- > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > >--- >[This E-mail scanned for viruses at TNWEB LLC] > > > > > > >Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/