I forgot, you may have to add a 100K resistor accross D1 depending on
the controllers loading.
On 5/12/05, DCFluX <[EMAIL PROTECTED]> wrote:
> I am asuming no one came up with a schematic.
>
> All parts can be obtained from www.web-tronics.com
>
> You can replace D1 with what ever voltage you need up to 11V to allow
> head room for the NPN transistor to function, And you can replace D1
> with a 10K resistor or if you just need +11 or +12 COS depending on
> the incoming voltage, and you can also put a 5 or 10K potentiometer in
> place of R2 and D1 to have a variable COS voltage.
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
