The following is quote from the 38A manual.
what I would like to know (from users of the 38A) is there a way to
'extract' a configuration list from the controller in the same way you can
display all the configuration information from a TNC? or is it strictly
menu, prompt, and response as stated here?
Thanks
Tim
= = = = = = = = = = =
Programming Via The RS-232 Interface
The Model 38 RS-232 port is valuable for initial test and adjustment, as
well as general purpose programming and monitoring. All programming is
done with friendly menus and plain English prompts. Programming is best
done with an RS-232 display terminal or PC. Tasks such as adding,
deleting, modifying parameters, retrieving airtime, and real-time
monitoring may all be accomplished without disrupting communications. Most
any RS-232 terminal or computer running a communications program may be
used.
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
