----- Original Message -----
From: "va3vkk" <[EMAIL PROTECTED]>
> Repeater controller
> RC 1000 Micro Computer Concepts
> I have enabled all the necessary options including dial 9
> but can't get connected to the line
> Perhaps some one can tell me what needs to be enabled for the patch to
> work
I don't know very much about the RC1000 except for these things:
1) There's a Yahoo email group just for them;
2) Use only the instruction sheet that came with the unit, as I've heard
that there are several variations on the RC1000;
3) If you trying to dial 9 to connect, you must be trying to get thru a
PBX of some sort... you may need to force a comma pause after the
9 to acquire your second dial tone;
4) Your PBX connection may be all digital or hybrid, instead of
analog, in which case the RC1000 may not be suitable for accessing
the PBX.
Good luck!
Ray Brown, KB�STN
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
