I have the originals of the following Communication Specialists 
 Products Instruction Sheets: 

  HP-1A High Pass Filter 

  ME-3 Microminiature Tone Encoder (one page) used the K-1 ceramic 
 resonator for frequency stability. (have several copies) 

  SS-32 Programmable CTCSS Encoder Instruction Sheet (Later version 
 was two pages, photo reduced from the larger four page Instruction 
 Sheet.)  (have several copies)

  SS-32M - much smaller version of the SS-32 - Instruction Sheet ... 
 two versions of the 2 pages, larger and smaller. 

  TE-64 Universal Encoder Instruction Sheet (two pages) 

  TS-32 Tone Encoder/Decoder Instruction Sheet (6 pages) (have 
 several copies) 

 ----- 

  SS-32M to ICOM IC-2,3,4A/AT hook up sheet (one page) 

  Communications Specialists Product Lists ... from the 1980's 

    Winter 1981
    Winter 1982 
    Spring 1986 - has the color picture of the grinning guy in the 
                yellow coverall's holding the wooden Porter Fish 
                Company box with several fish, two crabs and three 
                TP-38 Shared Repeater Tone Panels. 

  A 73 Magazine reprint - January 1981 of "Installing Subaudible 
 Tone Encoders" by Tom Hoag, WA7LMO/N6XB 
  

  I believe I may have other info in the garage ... but I will have 
 to go look at another time. 

  73, 

  Neil - WA6KLA 



Mike Morris WA6ILQ wrote:
> 
> There's already a bunch of stuff on the repeater-builder site....
> look at the Com-Spec page...  if you have anything that isn't
> already there, then absolutely.
> 
> Mike
> 
> At 06:44 PM 5/17/05, you wrote:
> 
> >   Might Kevin be interested in some original Comm Spec poop sheets?
> >
> >   Neil
> >
> >
> >Mike Morris WA6ILQ wrote:
> > >
> > > If anyone has a IAI manual and wants to loan it out to be scanned,
> > > or can scan it themselves, repeater-builder will be happy to provide
> > > a place for the PDF.
> > >
> > > Mike WA6ILQ
> > >
> > > At 08:39 AM 5/17/05, you wrote:
> > >
> > > >     I have a L1158A patch, also made by IAI, and no info on it. It
> > has two
> > > >modular phone cords coming out of it as well as a cord marked radio.
> > It was
> > > >once hooked to a low-band Micor base station. There is also a wall-wart
> > > >attached. If anyone comes up with any info I'd like to know as well.
> > > >
> > > >73 and thanks,
> > > >Al, K9SI
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> 
> 
> Yahoo! Groups Links
> 
> 
> 
>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to