Hey Don - I wish you good luck on this piece, and I feel that somewhere there is a person that can help you. I had a new one and had the exact same problem. Attempted to get Mr. Vogt to repair it - it was new- He suggested I cut a trace on the board and try it. - did that - No luck so he says send it in. Ok I did - There is a trace cut on this board - your warranty is void. I am aware there is a trace cut - you told me to do it. Oh No! - you should have sent it direct back to us - We cannot duplicate your problem so we are sending it back to you ( although there were more traces cut when received ) (( would that not revoid the already voided warranty?) You could hook mine to a dummy load, go to the next room and have another person talk to the aluminum box the transmitter was in. You could understand every word that was said perfectly- with NO Microphone! I brought mention of it on this group and feel like I must have disturbed some of Mr. Vogt's close friends. I wrote it off as a bad investment ( Hamtronics would not support their product ) and gave it to an experimenter friend of mine. Invested half as much in a GE Mastr II and have never looked back. I am not sure of the electronic term but it should start with JU and end with the letters NK. Oh, while I'm thinking of it - You should probably check and see how wide the thing is - Seriously - with audio it will get very! Extremely wide ( Mucho Mhz. )
Dave / N�ATH ----- Original Message ----- From: "Don" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, May 23, 2005 4:55 PM Subject: [Repeater-Builder] Transmit Noise What is the Best way to try and Eliminate Exciter Micro phonics, it is a Hamtronics T-301 220 Exciter, Enclosed in a Tight Aluminum case, If You touch the case Etc and Even the little Ext Muffin fan Vib will generate Noise heard on the transmit audio. Also this is the Exciter that I' am trying to get a Data Sheet on the Philips BFQ-43S Transistor with no luck yet Ps What is the Technical Term for Micro phonics? Thanks Don KA9QJG Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
