hi all,
great discussion here
well, 6 cans are better for the tx power you operate ,
you need a good "separation" between your receive and your tx .
with 6 your are in business
4 can be used too but i would suggect droping at 90 or 85 watts
also they depends also if you had not problem adjusting your can as
individual,if they perform well
and was easy to adjust.
one day i had problem with one can in a duplexer that corupt the performance
of the duplexer .
better filtration between tx and rx is the target ,i am using here 105 watts
and a master 2
and 45 watts with 4 cans and 2 Phoenix as repeater
73/s
gervais,ve2ckn
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
