HI Brett, If you can't find anything else to suit your fancy, look into some SCATA systems devices. I have a 12 channel analog input device that has plug on modules for additional monitoring and controls and can be programmed to do what ever you want in case if some value changed. I beleave it's called Momentum and I think it's made bt Square D. It's very small... about 6 inches square. you can connect to it over a eathernet connection also ( hint, internet or LAN). I'm planning to use it on one of my repeaters for the same thing. The problem is the sensor devices, like RF power foward and reflected, canbe had from Telwave but they are not cheap. good luck 73 AC0Y
--- In [email protected], "banjupb" <[EMAIL PROTECTED]> wrote: > Hello learned group members. > Does anyone know anybody that has a remote site monitoring system, ie > battery state, vswr, entry, generator start, fuel level etc. > I have a site in Africa that has 3 remotes site that we need to > monitor localing and if possible on a dial up modem from here in > Australia.it will need to leap frog thru a parallel telemetry rf link. > I can be contacted direct or thru the group. There was a system that I > saw many years ago but the memory is not that good to go back to a > flyer some 15/20 years ago. I need a solution asap. Cheers. > Brett [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
