Bradley, I have plenty of GE Voter chassis and cards, give me a email at [EMAIL PROTECTED] if interested.
Paul -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of skipp025 Sent: Sunday, June 05, 2005 8:22 PM To: [email protected] Subject: [Repeater-Builder] Re: Rx-voter >2 channel I've not seen anyone offer up a >2 channel voter kit since the early Doug Hall boards. There was the early 2 channel ARRL Unit, but you mentioned you wanted 3 or more channels. Don't know if it would be worth the time and expense to build a 3/4 channel voter from parts. The better thought would be to buy a used Hall Voter Board or an LDG Voter (which is uP based) and try to protect it well. I might have a diagram for a >2 channel voter and another option is to buy the Motorola Spectra Tac or GE Voter Service Manuals off Ebay. cheers, skipp skipp025 at yahoo.com > bradley glen <[EMAIL PROTECTED]> wrote: > Good day all > > I am looking for a circuit diagram for a 3 to 4 or > more channel noise/voting circuit . > > Non intelligent (uP) controlled due to high lightning > rate per annum. > > Regards > > Bradley Glen ZS5WT > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
