By the way, I have plenty of Allen Avionics delay bricks. These were installed in the original Quintron Simulcast systems. They work well if you know how to hook them up correctly. 1105 max delay which equates to about 204.6 miles of delay, but what do I know?
Paul -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of skipp025 Sent: Tuesday, June 07, 2005 5:22 PM To: [email protected] Subject: [Repeater-Builder] Re: Simulcast: Anyone done this for ham repeaters > bradley glen <[EMAIL PROTECTED]> wrote: > Just a thought of not reinventing the wheel-most of > the good delays use the "MN " delay chip. I believe the MN chips are now out of regular production. > Commercial simulcasts are usually routed via microwave > or other E1/T1 circuits that one could clock off. > Our GSM sites all clock off the incomming E1 link. Traditional analog microwave simulcasts are a pain to do on some systems. You need to deal with both group delay and timing issues for both the audio and any sub-tone/dcs requirements. An E1 or T1 would be easier. > Regards > Bradley Glen ZS5WT Cheers Bradley, skipp ps: Are not all the microwave systems on your side of the world upside down? :-) Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
