Yes, a very good power supply too.
Model Number: TPN1106A TPN1105A
AC Input: 121 V RMS 60 Hz 121 or 242 V RMS 50 or 60 Hz
Emer Power DC Input: 12 volt battery bank
Output Current limit Set: @ 30 Amps +/- 1 amp
Output Voltage: Same as battery charger requirement
From reading above, can be used to float charge your back-up
battery.
DC Output for
Nickel-Cadmium Battery: Float 14.25 V +/- 0.1 V
Equalize: 15.25 V +/- 0.2 V
DC output for
Lead-Acid battery: Float 13.0 V +/- 0.1 V
Equalize 14.0 V +/- 0.2 V
The following accessory outputs via P1003:
*12.0 VDC Audio A+ - fused at 4amps
*12.0 VDC A+ - fused at 4amps
9.6 VDC - is not fused
* Voltage set at power supply voltage output as required by the
battery bank used.
The TPN1105A / TPN1106A Series Power Supply is designed to operate
with the Motorola Micor Stations.
Motorola Manual for 68P81104E92
Hope this helps,
Neil - WA6KLA
modelav8r wrote:
>
> Can anyone tell me what the ratings are for the TPM 1105A power
> supply??? I found one and I am thinking about using it in my
> repeater but not sure about it. I saw the schematic on RB but
> haven't looked closely yet.
>
> Thanks,
> Larry N8RDT
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
