all the time or only when in TX mode?
----- Original Message ----- From: "Captainlance" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Thursday, June 09, 2005 8:13 AM Subject: Re: [Repeater-Builder] Fw: TPL Amplifier > The amp. requires about 1.4 watts to drive, the control wire can be hooked > to a variable supply, between 5 and 12 volts to adjust the power output. > lance N2HBA > ----- Original Message ----- > From: "Maire-Radios" <[EMAIL PROTECTED]> > To: <Repeater-Builder@yahoogroups.com> > Sent: Wednesday, June 08, 2005 11:16 PM > Subject: Re: [Repeater-Builder] Fw: TPL Amplifier > > >> has anyone out there got a Micor repeater PA UHF 75 watt, installed with >> a >> non Motorola repeater? if so what do you do with the yellow control >> wire? >> I know you can not have more that 2 watts in. Do you know what the >> lowest >> power it takes to drive the amplifier? >> >> thanks John >> >> >> ----- Original Message ----- >> From: "Eric Lemmon" <[EMAIL PROTECTED]> >> To: <Repeater-Builder@yahoogroups.com> >> Sent: Wednesday, June 08, 2005 9:40 PM >> Subject: Re: [Repeater-Builder] Fw: TPL Amplifier >> >> >>> John, >>> >>> Without knowing the model number, it's difficult to answer the >>> question. I have a TPL amplifier PA6-1AE-RXRF, which takes 5 watts in >>> and gives 100 watts out. It does not have any fuses in it, but it does >>> have a resettable circuit breaker rated at 25 amperes on the DC input. >>> >>> Some of the TPL manuals are available on the Repeater-Builder tech info >>> pages. >>> >>> 73, Eric Lemmon WB6FLY >>> >>> John wrote: >>> I have a TPL amplifier repeater grade rack mount. UHF 5 watts in >>> 100 watts out. Had the ASTRON power supply lock up the other day and >>> put out 15 volts. Did not hurt the Kenwood TKR 840 repeater but now >>> the amp is dead other than the power led. Does any one know if there are >>> any fuses in the amplifier? I need to move 2 to 3 Micors to get to this >>> repeater, so that is why I am asking before I do the move. thanks John >>> >>> >>> >>> >>> >>> >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> >> >> >> >> > > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/