Yea, I can beleave it!
--- In [email protected], Mathew Quaife <[EMAIL PROTECTED]> wrote: > Better not ask anything more than about their cell phone plans, that's about all they know. > > Mathew > > Coy Hilton <[EMAIL PROTECTED]> wrote: > If you have the owners manual look on page 38 for the information that > you asked for. It puts 7.5 volts on the alarm output when in alarm. If > you don't have the manual go to Radio Shack s web site it's there. > about the timing, if you have one, connect a volt meter and watch when > a test is running....record a test off the air with the receiver and > something like SCAN RECorder. OR ask at the Radio Shack....You have > questions They have answers...<;-) > 73 > AC0Y > > > > > > --- In [email protected], "Rich Garcia" wrote: > > Is anyone using the above weather radio (FIPS) interfaced to their > > controller? > > I had the opportunity today to catch a Tornado Warning and the radio > > outputs 7.5v DC on the controller. I am not 100% sure how the output > behaves > > but I did notice that later on the output went to 0v. BUT I had been > messing > > with the buttons on the unit so I was curious as to if the unit will go > > to 0v after the 5 minutes are up or will it stay high till you reset the > > radio. > > > > Thanks, > > Rich > > > > > > > > Yahoo! Groups Links > > > > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
