Bummer .... I say bummer if NLA means "No Longer Available". Last year before Hurricane Ivan I started putting up my private comm site down here in LA (Lower Alabama). Got the tower up half way and the equipment building just completed as the storm came through. Have spent these months since putting my house back together. Now that that is finally done Hurricane season is once upon us but hopefully we'll not have another Ivan. Anyway trying to turn my attention back on the tower, had DB-228's on the list for the VHF stuff but after Ivan was seriously considering spending the bucks for the 268's. Figured they would just hold up better being this close to the good old Gulf of Mexico. I knew from my older catalog that there wasn't a 268 specific variant cut from the factory for the Amateur Freqs but was hoping that I could get some special order. Last I checked the 228 was offered in that range. Oh well .... maybe "Cook Towers" if they still monitor this reflector can comment on the availability of the 268 at all and also on the 2 meter spread. Till then I've got 8 more sections of this Pirod 48M to stick up in the air and also 3 Halo's to mount so that will keep me busy and off the street for a while .... Hi. Skip -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Jamey Wright Sent: Wednesday, June 15, 2005 08:29 AM To: [email protected] Subject: RE: [Repeater-Builder] DB268??
Yes there is. 8 bay VHF with internal harness. There are 3 of them on the tower here at work. The catch is, they are NLA. I believe the current model is the DB228. Tessco SKU 494664 Jamey Wright Systems Analyst Morgan County EMCD 911 Decatur, Al 256-552-0911 -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of georgiaskywarn Sent: Wednesday, June 15, 2005 5:15 AM To: [email protected] Subject: [Repeater-Builder] DB268?? I loaned my Tesco catalog out to someone and cannot find this db products model number. Is there such an animal? This would be for a statewide ARES project and would be cut in the ham band. Thanks, Robert Yahoo! Groups Links Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
