Seems like you'd want to have the collected water run off into a small-mouth bottle outside the cabinet so it doesn't evaporate & rehumidify.

At 02:48 PM 6/20/2005 -0400, you wrote:
If you have a small cabinet, you might try putting a product like "Damp Rid"
in the bottom of the cabinet. You can find it at places like Lowes and
Wal-Mart. It is basically calcium chloride balls that are suspended in a
strainer with a pan under it to catch the moisture as it drips off. Three of
these seem to do an OK job in my 1903 vintage basement with a running
spring.

My idea here is  along the same line as the desiccant packets that they pack
some electronics in, or the air drier compressors that they hook to air
dielectric feedline.

You will probably need to empty the bucket and add more calcium chloride
pellets every year or so, but at a cost of $3 per year, it sure beats a
dehumidifier.

Scott

Scott Zimmerman
Amateur Radio Call N3XCC
612 Barnett Rd
Boswell, PA 15531

----- Original Message -----
From: "Chris" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, June 19, 2005 11:15 PM
Subject: [Repeater-Builder] Re: Water Tower Humidity


> Thanks for all of the good tips!
> We're going to try and seal a cabinet with I/O fans attached to keep
> it cool while keeping it dry.  We're also going to try the
> dehumidifier and seal up the area a bit better at the base.  Never
> hurts to try, right?
>
>
> Thanks again!
>
>
> Chris








Yahoo! Groups Links

Reply via email to