At 7/6/2005 07:37 AM, you wrote:
>Ok, something new has been discovered this morning, while going back
>to the repeater for further testing. I turned on the SM to get ready
>to check a few things, while set to 132.950 the squelch on the SM was
>open I could hear a pulsing noise. I then went to the output of the
>repeater, I could hear the same thing. This same noise has been heard
>on the output of the repeater on certain radios, kind of sounds like a
>warbly sound, led to always believe it was the audio delay board, so I
>ignored it, non of the users ever commented on it. The repeater was
>not transmitting at the time. I reached in an unplugged the delay
>board and noise is still there. I powered down the transmitter, no
>changes, I powered down the Mastr Pro receiver, noise still there,
>only thing left was the cat controller, powered it down and noise is
>gone. This noise was heard over a large frequency spread in the
>aircraft band on the SM. Could it be possible that the controller
>could be the cause sending havac out the band.
>
>Mathew
Can you manually key your TX with the controller unpowered & check for the
spur on the S.A.?
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
