--- Brian <[EMAIL PROTECTED]> wrote:
> Our local club has been running a 10 Yausu 2410 2 > meter > repeater for many years. It is run through a Wacom > wp-641 4 can > duplexer. Great results from this unit and it hears > excellent....We > recently aquired a new vertex vxr-7000 do to some > really nice friends > locally. In hooking up the new machine we have > terrible desense on > lower signals that would still be full quieting into > our old machine. > We had a local shop retune the duplexer and still no > luck. We have > tried it both with and without the contorller hooked > up and no luck. > It hears and transmits great in base mode but falls > apart in repeat. > > We are open to any ideas you all might have > > Thanks. > > Brian > KC0DWX Most likely it is the 4 cavity duplexer. Many times they do not seem to be good enough to work with some of the repeaters. The 4 cavity units are just barely good enough to work with some repeaters if everything is tuned up just right. YOu need to add some aditional selecitivity such as another cavity to each side. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
