Gang ;
I have some Moto Gear on Ebay just sold a Mara Trac & a Max
Trac 300 , Now a Max Trac and sometime future wise I think its a Syntor VHF
BTW , and a few speakers, and a Remote just sold , have more stuff to sell,
well its 12:39am. my time in MI. its under my call AB8RU .
drop in every day for updated list !
AB8RU Mark
http://www.ab8ru.org
the Ham Radio Fest thats on line no tickets to buy, no parking.
all from the comfy or yer chair !
73
----- Original Message -----
From: "Chuck Kelsey" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, July 09, 2005 10:58 PM
Subject: Re: [Repeater-Builder] Aviation Interference Issue (Update)
> Based on your findings, if it were me, I'd scrap the exciter for something
> more reliable -- like a GE Mastr II/MVP or a Motorola Micor. Sounds like
> what you've got is going to come back and bite you in the rear again.
>
> Chuck
> WB2EDV
>
>
>
> ----- Original Message -----
> From: "Mathew Quaife" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Saturday, July 09, 2005 10:25 PM
> Subject: [Repeater-Builder] Aviation Interference Issue (Update)
>
>
>> First I would like to thank Dave from Muncie, IN and his father for
>> coming out and assisting with the beast of a nuisance. It seems there
>> is some very critical coils inside the exciter, that has very little
>> tolerance. A slight movement and the thing goes whacko. All that can
>> be done now is to watch the output of the exciter on the SA and watch
>> for any spurs. When he started, and I have to admit, I made some
>> adjustments on the exciter over the past few days, but there was spurs
>> that did more than jangle, they sang all over.
>>
>> As well I would like to thank everyone that had input on this issue.
>> I'm certain it will be visited a few more times, but hopefully not
>> often if it should. Lots of good information and suggestions came out
>> of it. I'm glad it was the exciter and not a mix, a much easier fix.
>>
>> Thanks again.
>>
>> Mathew
>>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
