RE: [Repeater-Builder] Quintron DigiCap FM exciter

Sun, 10 Jul 2005 06:42:13 -0700

Byron,
 
Worked on those things for a long time back in the 80's and early 90's, they were a little strange.  Will look up a book and see if I can tell you the diode programming.
 
Paul
 
-----Original Message-----
From: [email protected] [mailto:[EMAIL PROTECTED]On Behalf Of radio questions
Sent: Saturday, July 09, 2005 11:05 PM
To: [email protected]
Subject: RE: [Repeater-Builder] Quintron DigiCap FM exciter

Paul,
You have got it to a "T"  that is it..
it is a "B"
I have most paper work for the unit but I can not locate the pages that cover the freq set info.
If you could help me with this that would be great Paul.
I also have the long audio delay board rev C  stamped   F1837  quintron control with the uhf receiver and link audio control board and ....tx control master ...

Paul Finch <[EMAIL PROTECTED]> wrote:
Byron,
 
What model it it, I probably have a manual for it.  Is it a "B" or "C" exciter?  If it is a diode matrix it's has to be a "B" exciter, the frequency is set on the matrix board.  Does it have a high stab Ovenaire ovenized oscillator on the right hand side of the backplane?  Are there about five cards mounted vertically to the left and two or three smaller cards mounted horizontally over the Ovenaire oscillator oven?  If that sounds familiar it's a "B" exciter, it will do simulcast analog audio if you have a good delay brick of some kind.
 
Let me know what you have, like I said I probably have a book.  You will need it if you have never worked on one before. 
 
Paul
 
-----Original Message-----
From: [email protected] [mailto:[EMAIL PROTECTED]On Behalf Of radio questions
Sent: Saturday, July 09, 2005 9:09 PM
To: [email protected]
Subject: [Repeater-Builder] Quintron DigiCap FM exciter

Hello all im new to this group, and I am trying to locate some Quintron Info.
I have a Quintron  DigiCap FM exciter
with a Daul Channel FSK
it is a diode matrix for the Freq from A , B and 0 -12
set up like this
        Ch1   1lo   1hi   
A
B
0
1
2
3
4
5
6
etc
also has two jumper  JW1  a/b   and JW2 a/b
 
Im trying to find out what configuration gives me what frequencies
which is the multiplier etc.. any help on this CARD please let me know thank you for your help
Byron

Sell on Yahoo! Auctions - No fees. Bid on great items.











Sell on Yahoo! Auctions - No fees. Bid on great items.












YAHOO! GROUPS LINKS



Reply via email to