It's up to $80 now I see.

Ron Wright wrote:

>Nick,
>
>You need to get a license, $75 for 5 years.  Also download part 95, regs
>for GMRS, from www.fcc.gov; about 20-30 pages.  They follow pretty much the
>old CB rules.
>
>Base stations are restricted to 20 ft above structure and 25 watts ERP, but
>repeater can go as high as they like and run 50 watts out of the tx, not
>ERP.
>
>A repeater will require a duplexed receiver/transmitte, antenna and
>normally a duplexer.  I don't like doing much with a repeater unless it is
>atleast 100 ft above ground and this is low, but can do something.
>
>As to cost...how much you got, hi.  From do it yourself $500-$1000.  Want
>all new ready to program and plug in and install $2500-$3000 not including
>tower or building, radio equip only.  Can spend more if you like.
>
>73, ron, n9ee/r
>
>
>
>
>
>Ron Wright
>[EMAIL PROTECTED]
>
>Ron is the owner of Micro Computer Concepts, a manufacture of repeaters and
>repeater controllers since 1988.
>You may see our products at http://home.earthlink.net/~mccrpt or call at
>727-376-6575.
>Contact me at 8849 Gum Tree Ave, New Port Richey, FL 34653 USA
>
>Owner of the 146.64 repeater, the highest repeater, 1175 ft HAAT,
>in the Tampa Bay area, Florida.  The repeater also has ECHOLINK, node 79540.
>
>
>Pasco County Skywarn Coordinator
>Skywarn meets on 146.64 each Wednesday at 8 PM.
>Skywarn nets are activated on 146.64 when the 
>National Weather Service broadcast a weather alert.
>
>see our web page at http://groups.yahoo.com/group/pascoskywarn/
>
>All are welcome.
>
>
>  
>
>>[Original Message]
>>From: ncamilli <[EMAIL PROTECTED]>
>>To: <[email protected]>
>>Date: 7/20/2005 10:09:52 PM
>>Subject: [Repeater-Builder] New to GMRS Repeaters
>>
>>Hi everyone. I am new to GMRS Repeaters and I was wondering what is 
>>needed to setup a basic repeater for a beginner. Also, about how much 
>>would it cost, what parts are needed, and where can I purchase them.
>>
>>Thanks in advance.
>>
>>
>>--
>>Nick
>>
>>
>>
>>
>>
>>
>>
>>
>> 
>>Yahoo! Groups Links
>>
>>
>>
>> 
>>
>>    
>>
>
>
>
>
>
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>  
>




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to