With my experience using the various Maxtrac radios [VHF/UHF and 900
mhz] in repeater and remotebase service, I would suggest you cut the
power back on that 40 watt rig to abt 25-30 watts. These radios ARE
NOT designed for continuous keyed down transmit mode [repeater service]
at their maximum power output, so be aware of this.
Doug W7FDF
--- In Repeater-Builder@yahoogroups.com, [EMAIL PROTECTED] wrote:
Hi All!.....I'm wiring up a temporary repeater using 2 16 pin VHF
Maxtracs and a 7k.....All is fine, my question is there a "safe"
power
level when used in repeater use with Fans?......73 Brian WD9HSY
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
