If you don't program it, I believe it defaults to three minutes.... I just checked my documentation and it says that "Yes," "No," or a single digit time from 1 to 7 minutes may be entered. If "Yes" is entered, it results in a Carrier Control Time of three minutes. I haven't tried it, but entering "No" may (should?) disable the timer; the documentation doesn't specifically mention it.
Richard, N7TGB -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Doug Blizzard Sent: Tuesday, July 26, 2005 6:24 PM To: [email protected] Subject: [Repeater-Builder] Re: GE Phoenix Radios as Links I have purposely not programmed a software TOT, however some have suggested that there is a hardware TOT. I have not been able to find it. I would also like to know how you wire up the Phoenix. I am using the pins on the back. Any thoughts? Doug N4HAJ --- In [email protected], "gervais fillion" <[EMAIL PROTECTED]> wrote: > it depends also when it has been programm if the 3.00 minutes timeout is > there. > if i remember by default it will have the 3.00 minutes > this is for safety reason for the p.a. > > do it return on the air? > > we have a repeater system here ,pc controled and there are 8 phoenixs > talking to each other > > these are good radio's > > 73/s,gervais ve2ckn Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
