I move them a little at a time, don't try to make big changes or you will
not be able to get a signal through it. If you want to, you can take the
cover off and inject a signal into each stage. Work from the output towards
the antenna connection. When you are able to get a signal from input to
output that you can measure, put the cover back on and do the final tune up.
73, Joe, K1ike
At 07:42 PM 8/4/2005 +0000, you wrote:
>Anybody know the proper tuning procedure to peak up/ move freq for
>the GLB preamp/preselector to maintain the rated selectivey?
>
>Dale K0JXI
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
