Re: [Repeater-Builder] REPEATER INTERMOD

[Maire-Radios]

are all your Freg licensed for 2 watts or some for higher power  I don't have my list to see if any of them are above that?  Are they all 12.5 channels?  Are any of they set up for 25k?   thanks     ----- Original Message ----- From: [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Sunday, August 14, 2005 2:32 PM Subject: [Repeater-Builder] REPEATER INTERMOD HELLO ALL I need a little help on a project, we have 2 Uhf Ritron repeaters, one is 2.5 watt (461.2125) and #2 is about 6 watts (461.4125) and one yeasu 25 watt 464.4625. The 2.5 watt has degraded over the years (15 year old repeater) I can not convince the supervisor that there is a problem with the repeater (drifting slightly off freq and intermod from the co located repeaters). Anyway these are in close quarters within 3 feet of each other on the wall and the antennas are within a 25 foot radius of each other. I am planning to use 2 maxtracs, a rick box, and a cellwave flat pack (mobile duplexer) as a replacement for the ritron 2.5 watt radio to show them that the repeater needs replacement.   Now with the .4125  6- watt ritron repeater using the same pl tone 200 khz away from where I will place the maxtrac repeater dose anyone see any intermod, front end overload, or signal rejection problems that the maxtrac's  ? thanks .....bob   YAHOO! GROUPS LINKS  Visit your group "Repeater-Builder" on the web.    To unsubscribe from this group, send an email to:  [EMAIL PROTECTED]    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.