I happen to have two DB-224's that are identical, same phasing harness,
connector, etc. What if one was to put elements all in one line, and
at the exact same height, mount one antenna on the north side of the
tower (mounted directly to tower leg with elements pointed straight
ahead) and mount the other directly on south side of the tower in the
same manner, and feed with power divider or a tee connector with odd
1/4 length of 35 ohm for matching purposes? If the antennas are fed
exactly in phase, that is. I understand about receiving signals 180
degrees out of phase in the coverage area, but wouldn't this
configuration be similar to a pair of elements on a DB-420? Would this
configuration serve as more omni-directional?
73, KC4FWC
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
