Hi Terry, >From my experience, the Tait units run off 13.8v, so the PSU would be just providing a 13.8v DC for the modules - perhaps either parallel the two windings on the primary of the mains transformer for 110v supply or perhaps source a replacement 13.8v supply that fits in the box?
I don't have a manual for the 800 series here though, I worked on some for a buddy a while back and he has the manual - if you're stuck I'll try and get a copy. sorry, Matt ----- Original Message ----- From: "Terry Stone" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, August 23, 2005 7:25 PM Subject: Re: [Repeater-Builder] Re: Tait Repeaters It's a T800 series with a T856-20 transmitter and a T855 receiver. I found out that this power supply is 220V so I'm looking for a 100 volt PS as well. Thats for your response--Terry Yahoo! Groups Links ___________________________________________________________ To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
