Sometimes the details get missed... 

There are a number of Eprom file formats. You 
know the software generates in "bin" file format. 
Bin being binary... 

There are two or three popular hex file formats, 
which are totally different file structures/layouts. 
You'll often see Intel.hex and Motorola.hex formats 
along with one or two others. 

Chances are your Eprom Programmer is set up for 
the more common Intel Hex. If you have a Logical 
Devices or Bytek Programmer it should be able 
to handle all the formats once you tell it what 
type you're loading.  Less expensive programmers 
won't do more than one or two formats. 

If your eprom programmer doesn't handle .bin format, 
you need to convert your file over to .hex before 
you burn the eprom. 

There are a number of file converters on the 
market, some are freeware.  Otherwise those of us 
with multi file format type eprom burners or file 
converters will probably be willing to help you 
out. 

cheers,
skipp 
www.radiowrench.com 

> "Andrew D. Hudanish" <[EMAIL PROTECTED]> wrote:
> I have recently acquired 5 Tait T800 series 
> 1 repeaters. I have an EPROM burner, new 27C64 
> chips, the Tait T800 programming software.
> PGM800  V2.21    DOS Based        Sept 1995
> PGM800  V4.05    Windows Based
> I burned a few EEPROMs from .bin images created 
> in the Tait software.
> I cannot get any of them to work.  When I read 
> the image, I get "Corrupt Image" error, but 
> the EEPROM loads.
> It shows the frequencies in the order I programmed 
> them.
> I am not using internal PL, so PL is set at off.
> Is there something I am missing?
> Is there anyone that could burn a dozen EEPROMs 
> for T800's?
> Thanks,
> Andrew D. Hudanish 
> KCØEJX







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to