Take the speaker out of the control head, and drill the
front panel in front of the speaker for a pot and two
mini-toggle switches (one on each side of the pot),
then reinstall the speaker.
The cone shape creates enough clearance for the parts.
Wire one switch as per the squelch mod article at
<http://www.repeater-builder.com/maxtrac/gm300-squelch-mod.html>,
the other as a PL / Carrier switch, and the pot in place of
the internal squelch control.
Mike WA6ILQ
At 05:15 PM 11/9/05, you wrote:
Thanks a lot. That worked like a charm. I needed to lower the squelch as this is the receiver on my repeater. With the current setting, on a mobile station there is no swoosh, just chopping in and out. Again, thanks for all the replies.
Andy KC2GOW
445.125 (4A)
Staten Island,NY
Yahoo! FareChase - Search multiple travel sites in one click.
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
- [EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
