Just buy the tilt compensator or an amp that has one internal. Try Toner cable equipment and Quality RF services, those are two companies I remeber dealing with, there are several more. Paul kb9wlc
--- DCFluX <[EMAIL PROTECTED]> wrote: > It is 75 Ohm cable, Paticualrly RG-6 Plenum which > has approx 1dB of Tilt per > Octave at 100'. Maximum power is +25dBmV. Intersted > in attenuating the lower > channels more than the upper ones, and I will follow > it with an amp on each > floor after it is compensated. > > Some genius company, that is used to installing > security systems in Las > Vegas ran the cable in this building and thought > that a single amplifier > would cover the entire building. Which is scary > because the company had the > $4000 piece of test equipment to tell them how > screwed up their install was. > Up on the third floor I measured 50dB of tilt > between Ch.2 and Ch.77 > > On 11/12/05, Kevin Custer <[EMAIL PROTECTED]> wrote: > > > > Matt, > > > > Which way do you want to tilt it? To compensate > for cable that precedes > > it? > > > > Does it have to be for 50 ohms, or will 75 be > okay? How much power does it > > need to handle? > > > > Kevin Matt, > > > > Which way do you want to tilt it? To compensate > for cable that precedes > > it? > > > > Does it have to be for 50 ohms, or will 75 be > okay? How much power does it > > need to handle? > > > > Kevin > > > > > > > > > > ------- Original Message ------- > > From : DCFluX[mailto:[EMAIL PROTECTED] > <[EMAIL PROTECTED]>] > > Sent : 11/8/2005 6:33:36 PM > > To : Repeater-Builder@yahoogroups.com > > Cc : > > Subject : RE: [Repeater-Builder] RF Tilt > Compensator Schematic? > > > > Any one have any ideas on how to build a > Tilt-Compensator? I had > > come ideas about using a pre-emphasis circuit, but > that is designed for > > audio frequencies and I need something for 50-550 > MHz. Preferably > > with a slope adjustment so it can contend with > varying lengths of cable. > > > > > > > > > > > > > > > > > > ------------------------------ > > YAHOO! GROUPS LINKS > > > > > > - Visit your group > "Repeater-Builder<http://groups.yahoo.com/group/Repeater-Builder>" > > on the web. > > - To unsubscribe from this group, send an > email to: > > > [EMAIL PROTECTED]<[EMAIL PROTECTED]> > > - Your use of Yahoo! Groups is subject to the > Yahoo! Terms of > > Service <http://docs.yahoo.com/info/terms/>. > > > > > > ------------------------------ > > > __________________________________ Yahoo! FareChase: Search multiple travel sites in one click. http://farechase.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
