Jim, Thanks, that's what I wanted to know.
Paul -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] Behalf Of Jim B. Sent: Monday, November 14, 2005 12:52 PM To: [email protected] Subject: Re: [Repeater-Builder] Micor 412.XXXX repeater and Syntor X mobile Paul Finch wrote: > OK, can anyone tell which split it is? The rest of the radios were > government surplus and on those frequencies. If these are on the low split > they would go to Ham really easy but if on the upper split NADA. > > Paul You're still talking about the SyntorX right? No, there's no way to tell from the front label, but for those radios, it shouldn't matter. I only know of two splits, and the high split (150-174) would go down to 2M just fine, sometimes you might have to do some minor soldering to bring the VCO down, but not always. Here's one of several good links for Syntor info: http://www.open.org/~blenderm/syntorx/index.html -- Jim Barbour WD8CHL Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
