Mike, I located a copy of Antplot on a backup CD (backups are good things...). I could post it in the Files section, if that is permissible as far as copyright (Kevin?), or send you a copy directly via email.
Laryn K8TVZ --- In [email protected], Mike Perryman <[EMAIL PROTECTED]> wrote: > > If you are able to locate it... please bounce a copy my way.. > > mike > > > > > >I used to have a copy of that program, but it is on the drive of my > >dead laptop. But the general, short answer is that at 1/4 wave > >spacing you get more signal directly out from the tower-in line with > >the tower and antenna. At 1/2 wave spacing, the signal is squashed > >out at 90 degrees to the line between the tower and antenna, and > >decreased straight out from the tower. I have confirmed this in > >actual measurements, while remotely switching between a top mounted > >omni and a 1/2 wave spaced antenna. Numerous measurements were made > >in the field with an in-line attenuator feeding the receiver. > > > >Hmmm... have to get that DB program from somewhere again. Jeff? > > > >Laryn K8TVZ > > > > > > > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > > > > > --------------------------------------------------------------------- > Mike Perryman Cavell, Mertz & Davis, Inc. > [EMAIL PROTECTED] Consulting Engineers > http://www.cmdconsulting.com 7839 Ashton Avenue > K5JMP Manassas, VA 20109 USA > (703) 392-9090; (703) 392-9559 fax; DC Line (202) 332-0110 > --------------------------------------------------------------------- > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
