Kevin, This sounds like a classic intermod problem. Does your repeater and the new one each have a dual isolator on its transmitter? Yes, you will need a dual isolator on your repeater transmitter as well as the new one 30 khz away.
John Lloyd, K7JL Intermountain Intertie http://www.ussc.com/%7Euvhfs/snowlink.html Message: 17 Date: Mon, 14 Nov 2005 18:54:42 -0500 From: "Kevin Berlen, K9HX" <[EMAIL PROTECTED]> Subject: Mastr II question One of the systems I take care of uses a Mastr II in station configruation as it's transmitter. Recently, a repeater went on the air that is 30 KHz above our operating frequency. If you are within about five miles of our site and are monitoring on the new machines frequency, you can hear our repeater. It is not distorted, and it does not have any other modulation on it. I have heard this signal on a number of differnet rigs, and so have several other users, so I don't think it is a problem with overload of my receiver or other problems in my equipment. I am not using the station receiver in the repeater, but have an ICOM in it, as the only TX ICOM I had was an EC version. I am using the RX ICOM just to provide the conpensation signal to the TX element. I had a similar problem about a year ago with a spur 60 KHz above our carrier, but it cleared up after I swapped the exciter and PA boards out. I have not yet been to the site to check out anything yet, but just wondered if this is a problem anyone else has seen. Thanks, and 73, Kevin, K9HX __________________________________ Yahoo! FareChase: Search multiple travel sites in one click. http://farechase.yahoo.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
