Hi
I have GE mstrII rack mount uhf. AU88b last four of the model. I have
read your web pages you stated that the ge pl ctss board does not
transmit pl tone . On my system board I have a card that is
(PL19D4172GIGG rev b with 110.9) . I hook up the controller per
repeater builder web page. Works great as long as keep the GE stock
controller card in with the repeat disabled. My problem is I would
like to have a pl to be transmited. The recieve side works fine drops
the voltage with the proper tone . I have the controller connected to
RUS 0v-3.88v ,cas has 0v-9.8v just testing info for you .
I would like to find out a way to remove the ge internal controller and
have the pl for recieve and transmit . The external contoller does not
have ctss option. I have the manual been reading don't want to put a
jumper from decode output to exciter connection without some facts.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
