You are right Kevin... one can find early receiver and
receiving converter projects authored by Mr Vogt in Ham
Radio (*rip) magazine.
There's another post on the group here about the Diode
CW ID'er board being the same circuits. Well for the
most part... there were a lot of diode cw id'er board
circuits flying around the magazines back in the 60's
and 70's. Just pick your chips and follow the well
published guidelines using the common Hamtronics - VHF
Engineering type circuit or the many times rehashed 74154
chip unit found in numerous 73 Magazine circuits.
The Hamtronics CW ID Board was the best design. Everything
worked when you built it up from a kit.
cheers,
skipp
> Kevin Custer <[EMAIL PROTECTED]> wrote:
>
> mch wrote:
>
> >Most of them, if not all, were continued on by Hamtronics, and updated.
> >They still make the kits.
> >
>
> I could be mistaken, but I don't think Jerry Vogt had anything to do
> with VHF Engineering.
>
> Kevin
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
