Eric, I forgot to include that the station is used in the "base station configuration". I have a CAT300DX hooked up to the station. I checked the code plug information, and changed the setting to PL & DPL only. It was set to carrier and PL & DPL.
I am having the same problem with the signal coming in. Jim, K8COP ----- Original Message ----- From: "Eric Lemmon" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Friday, November 25, 2005 7:24 PM Subject: Re: [Repeater-Builder] MTR 2000 Repeater Intermod > Jim, > > I'm quite familiar with the MTR2000, and have five of them in service. > > Since the rogue signal is received during the hang time, it must have a > 94.8 Hz > PL tone on it. Unless... are you certain that your repeater was not left > in > carrier squelch during testing? > > Another possible cause is an incorrect repeater set-up. Read the > station's > codeplug. Then, > > 1. Click on "Personality" in the toolbar > 2. Click on "Channel Information" in the drop-down menu > 3. Click on "Repeater" in the Option window > 4. Select "Carrier & PL/DPL" for BOTH Analog Activation and Analog > Hold-in > 5. Select "Off" for Analog Deactivation > > If the above steps do not alter the symptoms, please send me your *.pcf > file for > examination. > > 73, Eric Lemmon WB6FLY > > > "Jim, K8COP" wrote: > >> We're experiencing a problem with our new Motorola MTR 2000 Repeater. >> The >> repeater is on 146.22/82. PL of 94.8 Hz. When a station is using the >> repeater, and just when they unkey, we end up with a signal that is on >> 155.490 (PL 107.2) comes through the receiver. The 155.490 frequency is >> used by our local Law Enforcement Dispatch. This does not happen every >> time, >> but intermittent. >> Their repeater is also a Motorola MTR 2000. The repeaters are about 4 to >> five miles apart. The Ham repeater has been totally checked out. It has >> a >> new duplexer, intercabling, 7/8 hardline. The 6 dB gain stationmaster >> antenna was not replaced. The SWR was checked and is OK. >> >> I am open for ideas on this one. >> >> Jim Duram, K8COP >> Whitehall, MI. >> >> >> Yahoo! Groups Links >> >> >> >> > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
