----- Original Message -----
From: "Maire-Radios" <[EMAIL PROTECTED]>
> there is the PL units and the DPL units you can not mix them. and only
> one tone per repeater. also you don't need the rib.
I got two questions on the R100. On the board that is attached to the lid,
when you
unlock it and rotate it up, at the top edge, are spots for 3 switches. When
Repeater
Disable is on, the LED on the corner lights up. I presume that that inhibits
the entire
repeater. But there's a spot for PL disable (the switch is missing but there's
evidence
that something was there). If a switch is installed and flipped on, will it
disable the
PL / DPL ?
And, I presume the big connector in the center of that same board is the
connection
for "accessories" like a controller? I'd like to find how to connect something
like an
ID-8 or maybe a NHRC-2 into it, mostly for Part 90 ID. :-)
Thanks!
_Ray_ KBØSTN
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
