At 12/17/2005 08:05, you wrote:
>With regard to interfacing radios via "packet data" ports.
>Has anyone looked at the audio flatness of these ports?
>Also, some rigs have a 1200 baud in/out and a 9600 baud
>in/out, which (apparently) have very different audio levels.
>I suspect there are other characteristics that are different, too.
>
>73, Bob K0NR
Can't speak directly for the DR-x35 series, but my FT-8500's 9600 baud port
appears to be undeemphasized (what some call "flat" audio"), while the 1200
baud port is deemphasized and squelched (CTCSS squelched as well if enabled).
Bob NO6B
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
