The below is an old Decibel Products method
and it does works (and was used) on their
Tx Combiners. I have one here... along with
some very limited paperwork on it.
cheers,
skipp
> [EMAIL PROTECTED] wrote:
> I've posted this a few times...
> **IF** loss on the incoming signal(s) isn't an issue ...
> 1/2-wave (or multiple thereof) jumpers, daisy-chained
> between "T"s.
>
> [rx.ant-coax] ->>- [T-(rx)] -jumper- [T-(rx)] -jumper- [last
> rx]
>
> Our RXs did not exhibit problematic interactions -- used
> RG58 & PL259s.
> Seems to play nicely. YMMV.
> ~/ N8BQN /~
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
