Vincent,
Take everyone's advice about preselectors and preamps with appropriate
gain. Then go to ebay and look for "Mini-Circuits" there. You will find
probably dozens of suitable devices, with 2 to 24 or more ports. Many tend
to use SMA connectors which are excellent but not everyone can deal with
SMA's. If you are lucky you will find those with N's or BNC's. Data sheets
are available at mini-circuits.com.
Anzak also makes some good commercial quality splitters.
Again, these are passive devices so you will probably need some gain
up-stream of the splitters. A good thing about the Mini-Circuit splitters is
that most have 20 db or more isolation between ports so that what you hook
to one port won't adversely affect another port. I had some problems once
with two UHF Marti receivers teed to the same antenna where enough of the
local oscillator of one would back up into another. Then both receivers
would pick up the same signal. Not good. A splitter with decent port
isolation cured the problem.
Merry Christmas & 73,
Al, K9SI
> Date: Sun, 18 Dec 2005 16:03:53 -0500
> From: Vincent Caruso <[EMAIL PROTECTED]>
> Subject: Multiple receivers one antenna ???
>
> I would like to install one antenna for four link receivers. How
> complicated is this? What do I need to do this?
>
> Thanks in advance
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
