Lee,

The Motorola TDE7780A Mobile Duplexer is actually an RFS/Celwave 633-6A-2N
unit.  You are correct, it is designed to operate in the 450-470 MHz range,
with a 5 MHz split.  Since the notch tuning is fixed, it cannot be tuned to
operate *properly* in the 70cm Amateur band.  The Celwave catalog states
that it can handle 50 watts, it has a 1.4 dB insertion loss, and 75 dB
isolation.  It should be okay at an isolated site, but not at a site with
multiple transmitters.

The TDE7780A duplexer is not discontinued.  In fact, it is the specified
duplexer to fit inside GR1225, RKR1225, and similar compact UHF repeaters in
the Motorola product line.  Tuning instructions can be found here:

<http://www.repeater-builder.com/rbtip/notchduptuning.html>

73, Eric Lemmon WB6FLY

-----Original Message-----
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf Of Lee Jones
Sent: Tuesday, December 27, 2005 11:07 PM
To: [email protected]
Subject: [Repeater-Builder] for trade celwave notch duplexer

Hey all I have a celwat rfs uhf notch mobile duplexer.  cat no TDE7780A
SERIAL NO 07-94-A111
I believe this is a 450-470 duplexer. I couldn't get it to work on a 440 ham
band. I couldn't find any info on the duplexer i think it's discontinued. Im
looking to swap out for a 440mhz one. Any takers. Lee










 
Yahoo! Groups Links



 








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to