Laryn Lohman <[EMAIL PROTECTED]> wrote:
--- In [email protected], TGundo 2003 <[EMAIL PROTECTED]>
wrote:
> Stupid question: what about the ground on your power supply? Do
you cut that pin off to seporate your gear from the electrical system
ground? I didn't. If you have a seporate ground system and you still
have a tie to the electrical ground you have two different potentials
meeting at your gear. Besides the ovious dangers, you could have
several volts difference being created on your ground potentially
causing other fun problems.
Tom, are you asking--SHOULD you cut off the 3rd pin on your AC plug?
No, you do not. From a safety standpoint, a big no. I can explain
further if you like.<<<<<<<<<<<<<<<<<<<I was being sarcastic, I know better! :)
As far as building tops, I put quality surge arrestors on ALL
wires/cables leading in or out of the cabinet, and mount the arrestors
on a separate single-point ground plate or bar. Ground the plate to
building structural steel with one or more heavy >6AWG cables, and
bond the equipment cabinet to the plate. That's the simple version...<<<<<<<<<<<<<I have done it very similar at a building site. Good Install!
Happy New Year!<<<<<You too! Tom, W9SRV
Laryn K8TVZ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! for Good - Make a difference this year.
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
