Find a strange weird problem I recall the last posted while back a RF feedback problems Inotes the repeater win it key up use to test on my HT then nukey here the transmitter on the repeater microsecond nukey that here a click transmitter its unkey than it key up for the courteously tone from CAT 300DX controller there is some type of delay? has anybody in this forum spirits this problem before ?with their MOTOROLA MICOR VHF mobile
this thread !!!!!!!! :) Anthony W4NCR --- In [email protected], "ANTHONY" <[EMAIL PROTECTED]> wrote: > > Follow up from the original thread !! > I have a Micor Motorola mobile repeater operating on 147.165 MHz > and I have foreign broadcast transmitting on a frequency of 11.700 > MHz which is getting into the IF section of my receiver which also > operates on the same frequency 11.700 MHz so my question that I'm > asking is how can I shield this foreign broadcast so it will not be > able to get into the IF section of my receiver and stop it from > constantly keying my repeater up when propagation is good? > > > Subject: Re: MOTOROLA MICOR receiver VHF boogirls2 > > I been tested different power supplies steel have the same problem? > It's Agivate at times and to find a needle in haystack , And when it > does this sometimes, doing day time usually was at time at night > after 9 p.m. you cannot use it making the noise?? Thanks for all > reply > this thread !!!!!!!! :) Anthony W4NCR > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
