About 4 years. This is the tower in my backyard. Its Rohn25g 72ft+19ft 
mastpipe. One correction, its actually LMR400UF(ultra-flex). Gotta do 
the rotor loop!


Mike Perryman wrote:
> Jay,
> I am curious how long the LMR-400 (feed-line up the tower)has been in
> service?
> 
> mike
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[EMAIL PROTECTED] Behalf Of Jay Urish
> Sent: Friday, January 06, 2006 11:52 AM
> To: [email protected]
> Subject: Re: [Repeater-Builder] Repeater Assistance in Michigan.
> 
> 
> Just as a point of reference, I have a UHF machine Moto MSF5000 pumping
> out 90watts going up 170 ft of LMR400 coax and I get great results. To
> make it more interesting, I have a comet duplexer at the feedpoint (in
> my station) so I can use the VHF part of the fiberglass dual band
> wonderstick as RX for my vhf repeater till I get a duplexer that will
> tune to 144.630(my DB duplexer wont)
> 
> 
> [EMAIL PROTECTED] wrote:
> 
>>At 1/6/2006 01:34, you wrote:
>>
>>
>>>Bob,
>>>
>>>Sorry if I didn't get it right but now I am really confused .... and open
> 
> to
> 
>>>learn.
>>>
>>><Snip and paste>
>>>
>>>>Shielding percentage of the antenna feedline has nothing to do with
> 
> duplex
> 
>>>>suitability.
>>>
>>>Somewhere I am missing something.... If shielding doesn't play a part in
> 
> the
> 
>>>suitability factor of selecting feedlines,  why do we use hardline (other
>>>than less loss) or double shielded jumpers for connections etc.in a duplex
>>>operation?
>>
>>
>>Double-shielded jumpers are needed where isolation is needed between TX &
>>RX (duplexer jumpers & RX/TX connections to the duplexer).  From the
>>duplexer antenna connector onward to the antenna, the TX & RX are already
>>combined.  What's important there is linearity.  RG-214 is
> 
> double-shielded,
> 
>>but it's also silver plated (or supposed to be, some '214-type' cable
>>isn't).  Hardline has a solid outer conductor with no intermittent/point
>>contacts to generate IMD, so it's also extremely linear.
>>
>>Bob NO6B
>>
>>
>>
>>
>>
>>
>>
>>Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>>
> 
> --
> Jay Urish    Systems Engineer
> Unixwolf Enterprises LLC.
> http://www.unixwolf.net
> 972.691.0125    972.965.6229
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
-- 
Jay Urish    Systems Engineer
Unixwolf Enterprises LLC.
http://www.unixwolf.net
972.691.0125    972.965.6229




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to