Robert, You will need the VPL-1 Programming Cable for both the VXR-5000 integral controller as well as the Pacific Research controller. I know; I have a UHF VXR-5000 repeater in GMRS service right now with a PR R-310 controller.
The VPL-1 cable contains circuitry for data conversion and multiplexing, so you should purchase this cable- it's not cost-effective to build one. Also, you should have the VXR-5000 Service Manual in hand before attempting the programming. 73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of splitech Sent: Saturday, January 07, 2006 11:44 AM To: [email protected] Subject: [Repeater-Builder] Vertex 5000 Hello, I have a Vertex 5000 repeater. I have a Pac-Res controller coming in the next week, But I need to re-program the Vertex controller. I don't want to pay for a programming cable, but I would like to make one.. I have the pinouts for the controller 1. SP (-) 2. SP (+) 3. N.C. 4. MIC 5. GRND 6. 9+v 7. CL.SW (not sure what this is) 8. CL.DATA (not sure what this is) Also, looking to find out, what wires go to what on the DB-9 cable.. Those are 1. Data Carrier Detect 2. Received Data 3. Transmitted Data 4. Data Terminal Ready 5. Signal Ground 6. Data Set Ready 7. Request to Send 8. Clear to Send 9. Ring INdicator (won't be using this one) Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
