If you have the digital station, it is possible to hook the controller to the
local PTT and just flip the disable switch "on" to disable the internal
controller. If something goes wrong with your external controller, just unplug
the cable and flip the the disable switch off and your are back on the air with
the MSF control.
Dave Baughn
Director of Engineering
The University of Alabama
Center for Public Television and Radio
WVUA/WUOA-TV & WUAL/ WQPR/ WAPR FM
Box 870150
195 Reese Phifer Hall, 901 University Blvd.
Tuscaloosa, Alabama 35487
205.348.8622 cell 205.310.8798
NEW EMAIL [EMAIL PROTECTED]
>>> [EMAIL PROTECTED] 01/07/06 09:41PM >>>
To Andy, thanks for the reply and will send you a direct email during the week
once I confirm a few things with my partner in repeater hell.
FOR THE GROUP:
How would I disable the the internal controller from the repeater? What has
to be disconnected in order for my external controller to work without
interference from the motorola board?
Also, are there any locations on the MSF outside of using the DB-25 connector
on the side of the cabinet to get the proper control points (cos,ptt audio
etc...) to run to my controller?
I may have the manuals and stuff somewhere so I'm going to make a severe
effort to find them, thanks though.
Andy KC2GOW
---------------------------------
Yahoo! Photos
Got holiday prints? See all the ways to get quality prints in your hands ASAP.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
