> I don't know what you
> will be driving the amplifiers with, but do try to come up with the
> right drive level.
That shouldn't be a problem, the daniels gear has a pot for variable
output.
> The UHF amplifier utilizes an Antenna Network in association with
the amplifier for power control.
1 x 1 x 4 inch brick with N connectors and three terminals for
forward/reflected outputs and ground?
> With all that said, the CTRL input is basically a variable
> voltage to the controlled stage. Voltage at this point ranges
> from about 7 to 14 volts depending on what you have the
> Power level set to and what the Antenna Network will allow.
More volts = more watts, or the other way?
> Hope this helps...
> Kevin Custer
OH it DOES! :) Thanks
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
