Having opened the shield, I can see that the terminal marked feeds
current to the first amplifier stage. The second and third stages have
wires running to a seven pin plug, where I have nothing connected.
The last stage is definitely powered from the +12 rail.
I have the input fed in at 400mW, amp powered, and I've tried taking
the CTRL terminal from ground through 12V. It isn't drawing any current
to mention, and the output isn't moving the needle with a 100W VHF slug
in the bird.
I hope that I need to do something different with the seven pin plug.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
