OOOK.
I have signs of life on one of the VHF amps now, 25W output from 0.4
input, so it's definitely an amplifier.
A: Feed proper band to proper amp.
B: Destroy not one, but TWO bad SMA/BNC adaptors. (somewhat less than
0.01W arriving if the cable flexed the wrong way.
C: Check state of charge on scooter battery under load, 11V results
in low power out.
D: Tuning also needed to be done, to go from a bare needle twitch to
25W.
It's been one of THOSE days.
One VHF at 30W, one at 18W, and the UHF at about 95W.
Much improved picture.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
